Showing posts with label product review. Show all posts
Showing posts with label product review. Show all posts

Thursday, October 18, 2012

Tool review: Performance Tool W80521 6 Wire Ford Spark Plug Gauge

A good wire spark plug gauge comes in handy when gapping spark plugs, especially older or worn plugs.  There are many different wire gauges to choose from, and the Performance Tool W80521 6 Wire Ford Spark Plug Gauge is not one of the better ones.

This product uses pivot-style wire gauges, similar to how a Swiss Army Knife works.  There are six wires, labeled both in inches and millimeters:

   - .032" (.813 mm)
   - .034" (.864 mm)
   - .041" (1.04 mm)
   - .044" (1.14 mm)
   - .050" (1.27 mm)
   - .054" (1.37 mm)

However, the .044" wire is actually labeled as .045" on the gauge itself, as opposed to the .044" advertised on the packaging, so someone purchasing this gauge specifically for a spark plug that requires a .044" gap will be disappointed.  Contacting Performance Tool customer service does no good, as this particular gauge is no longer made, and the company does not offer a comparable replacement.

The wires are riveted into the gauge itself, and the wires riveted into one side are very loose, while the wires riveted into the other side are very tight.  The whole tool feels slippery, like it was dunked in oil before it was packaged.

In addition to the wires, this tool does come with a gap adjuster and a spark plug cleaner brush.  Those two tools make the gauge slightly more appealing, but you could easily find a much higher quality product without too much shopping around.

The W80521 spark plug gauge comes with a lifetime warranty, but since it's not made anymore, that warranty may not be good for much.  Also, according to the package, this product contains lead.

Thursday, July 5, 2012

Review: Lisle Hose Pincher

If you're going to be working on your mower, you'll eventually need something to clamp a hose with.  You can buy little twist clamps that usually come in a set of two, but for a couple bucks more you can get a hose clamp tool -- the Lisle Hose Pincher, model 23000.

The Lisle Hose Pincher looks just like a pair of scissors.  It works great for clamping fuel lines and other rubber hose.  Just open the grip, place it around the hose, and squeeze.  The ability to use it one-handed is very helpful.  The tip is angled for both small hoses and large hoses.  It locks like a pair of hemostats, and you unlock it by pulling the handles away from each other.  Sometimes you need two hands to unlock it though, if it's gripped tight.

The only downside to this hose clamper is that it's kind of big, so it may not work for hoses in tight places.  I had to wriggle it a bit to get my mower's fuel line, but it eventually fit.  For a small space, you might be better off with a smaller clamp, but if this one will fit it works great.  You can just lock it and leave it attached to the hose while you drain the fuel tank, remove the carburetor, or do whatever you need to do.  And the tool is plastic, so it won't cut into the rubber hose while it clamps.

You can get the Lisle Hose Pincher on Amazon.com for $9.95, cheaper than most hose clamp pliers and only a buck or two more than most small screw clamp pairs.

Friday, June 29, 2012

Review of EcoTech Mower Coat

A mower lubricant or coating that you can spray on the underside of the deck will help to keep grass and dirt from building up and help the mower run better.  There are a lot of different products you can buy, but a good one is EcoTech Mower Coat.

You can spray EcoTech on the underside of the deck, on the blade, on any exposed pulleys or shafts, and on the wheels, too.  It definitely slows down the accumulation of grass and dirt.  On my lawn, I used to have to stop mowing at least two or three times each time I mowed to clean off the underside.  Since I put a coat of EcoTech on it, I haven't had to stop once.  (I usually clean it after I mow, but the accumulation is never that much.)  It's been almost a month since I sprayed it on and it's still working.

EcoTech also works great as a lubricant for the crankshaft.  On my mower it has improved engine starting since I began using it.  A 10-ounce can of EcoTech costs $5.62 on Amazon.com.